wrtnode web烧系统失败该怎样定位问题。

wrtnode web不保留配置烧系统是怎样一个流程,我等6分钟还是系统应用升级中,请不要拔掉电源,但是telnet能进去,没有任何配置更新,新添加的应用也没有!求大神赐教!
已邀请:

xzmu - 10w

赞同来自:

luci刷机?如果是luci刷机应该不至于刷不进
 
或者换用mtd命令刷机 : 把固件上传至 /tmp下 ,然后 mtd wrtie /tmp/文件名  firmware -r

bear_218 - 学习中,努力学习中

赞同来自:

luci刷机, 不知道怎么就刷了半天没有反应,就好像系统重启了一下而已

bear_218 - 学习中,努力学习中

赞同来自:

查看luci更新系统的过程是上传文件, 然后用sysupgrade 命令更新,我不保存参数形式执行,更新还是没有去掉参数,新加的功能也没有!admin@TELPO:/# sysupgrade -n /tmp/o
openwrt-ramips-mt7628-wrtnode2r-squashfs-sysupgrade.bin
overlay/
admin@TELPO:/# sysupgrade -n /tmp/openwrt-ramips-mt7628-wrtnode2r-squashfs-sysup
grade.bin 
killall: watchdog: no process killed
Sending TERM to remaining processes ... logd rpcd netifd crond uhttpd dnsmasq firstboot_wps l2tpd arpwatch starter charon run_start.sh ntpd [  591.100000] device br-lan left promiscuous mode
telpo_lte ntpclient Apr  7 17:47:08 ipsec_starter[2422]: charon stopped after 200 ms

Apr  7 17:47:08 ipsec_starter[2422]: ipsec starter stopped

miniupnpd Apr  7 17:47:08 miniupnpd[3498]: shutting down MiniUPnPd
ubusd sleep 
[04010D08][04010D07]
DDR Calibration DQS reg = 00008888


U-Boot 1.1.3 (Mar 15 2017 - 16:41:48)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fb8000
flash manufacture id: ef, device id 40 18
find flash: W25Q128BV
============================================ 
Ralink UBoot Version: 4.3.0.0
-------------------------------------------- 
ASIC 7628_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Mar 15 2017  Time:16:41:48
============================================ 
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768 

 ##### The CPU freq = 575 MHZ #### 
 estimate memory size =64 Mbytes
RESET MT7628 PHY!!!!!!GPIO2MODE = 110
GPIO_CTRL_1 = 500
GPIO_DATA_1 = 6fff

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 

xzmu - 10w

赞同来自:

64M的板子?不是2r?

bear_218 - 学习中,努力学习中

赞同来自:

2r的,16M
dts这样改了,makefile也将2r的由原来的8M改为16M
    palmbus@10000000 {
        spi0: spi@b00 {
            status = "okay";

            m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "w25q128";
                reg = <0 0>;
                linux,modalias = "m25p80", "w25q128";
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;

                partition@0 {
                    label = "u-boot";
                    reg = <0x0 0x30000>;
                    read-only;
                };

                partition@30000 {
                    label = "u-boot-env";
                    reg = <0x30000 0x10000>;
                    read-only;
                };

                factory: partition@40000 {
                    label = "factory";
                    reg = <0x40000 0x10000>;
                    read-only;
                };

                partition@50000 {
                    label = "firmware";
                    reg = <0x50000 0xfb0000>;
                };
            };
 

xzmu - 10w

赞同来自:

从日志看sysupgrade就没有在刷固件。有可能是你的固件太大了,直接就过不了校验

bear_218 - 学习中,努力学习中

赞同来自:

那是要改脚本还是要怎么办呢,我的固件有8m多

xzmu - 10w

赞同来自:

1、尝试mtd升级
2、检查你 是不是改了板子的名称之类的,导致升级的时候对不上直接跳过重启了

bear_218 - 学习中,努力学习中

赞同来自:

编译去掉两个应用就可以升级,加上后编译的固件就大了一些就不能升级了,有解么,大神

xzmu - 10w

赞同来自:

无解,只能对固件瘦身

bear_218 - 学习中,努力学习中

赞同来自:

我的flash有16m不能升级8m的固件有点不科学吧!

xzmu - 10w

赞同来自:

你把你的内核日志上传一下

bear_218 - 学习中,努力学习中

赞同来自:

[   27.070000] CmdSlotTimeSet:(ret = 0)
[   29.540000] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   29.550000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.560000] [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0
[   29.570000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.580000] [PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0
[   29.600000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.610000] [PMF]ap_pmf_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0
[   29.620000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.630000] MtAsicSetRalinkBurstMode(2919): Not support for HIF_MT yet!
[   29.650000] MtAsicSetPiggyBack(763): Not support for HIF_MT yet!
[   29.680000] MtAsicSetTxPreamble(2898): Not support for HIF_MT yet!
[   29.700000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.710000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.730000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.750000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.760000] The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8
[   29.770000] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
[   29.790000] Main bssid = d1:3c:30:6e:31:12
[   29.790000] <==== rt28xx_init, Status=0
[   29.830000] mt7628_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0xd7083f0f
[   29.840000] WiFi Startup Cost (ra0): 4.320s
[   30.020000] device eth0.1 entered promiscuous mode
[   30.030000] device eth0 entered promiscuous mode
[   30.130000] br-lan: port 1(eth0.1) entered forwarding state
[   30.150000] br-lan: port 1(eth0.1) entered forwarding state
[   30.210000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   30.400000] AddTxSType: already registered TxSType (PID = 32, Format = 0
[   30.410000] The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8
[   32.150000] br-lan: port 1(eth0.1) entered forwarding state
[04010D08][04010D07]
DDR Calibration DQS reg = 00008888


U-Boot 1.1.3 (Mar 15 2017 - 16:41:48)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fb8000
flash manufacture id: ef, device id 40 18
find flash: W25Q128BV
============================================ 
Ralink UBoot Version: 4.3.0.0
-------------------------------------------- 
ASIC 7628_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Mar 15 2017  Time:16:41:48
============================================ 
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768 

 ##### The CPU freq = 575 MHZ #### 
 estimate memory size =64 Mbytes
RESET MT7628 PHY!!!!!!GPIO2MODE = 110
GPIO_CTRL_1 = 500
GPIO_DATA_1 = 6fff

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial. 
   9: Load Boot Loader code then write to Flash via TFTP. 
 0 
   
3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   MIPS OpenWrt Linux-3.18.29
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1177431 Bytes =  1.1 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...

[    0.000000] Linux version 3.18.29 (root@ubuntu-telpo) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #139 Mon Apr 10 10:54:23 CST 2017
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is WRTnode2R
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0007a4ff
[    0.000000] Readback ErrCtl register=0007a4ff
[    0.000000] Memory: 61232K/65536K available (2608K kernel code, 130K rwdata, 532K rodata, 176K init, 186K bss, 4304K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_of_init: no matching clocksources found
[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] pinctrl core: initialized pinctrl subsystem
[    0.090000] NET: Registered protocol family 16
[    0.200000] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
[    0.350000] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK)
[    0.360000] mt7620-pci: probe of 10140000.pcie failed with error -1
[    0.380000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.390000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.400000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.410000] Switched to clocksource MIPS
[    0.420000] NET: Registered protocol family 2
[    0.420000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.440000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.450000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.460000] TCP: reno registered
[    0.470000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.480000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.490000] NET: Registered protocol family 1
[    0.500000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.530000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.540000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.570000] msgmni has been set to 119
[    0.570000] io scheduler noop registered
[    0.580000] io scheduler deadline registered (default)
[    0.590000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[336]
[    0.600000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[350]
[    0.620000] gdma-rt2880 10002800.gdma: revision: 3, channels: 16
[    0.630000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.640000] console [ttyS0] disabled
[    0.650000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.670000] console [ttyS0] enabled
[    0.670000] console [ttyS0] enabled
[    0.680000] bootconsole [early0] disabled
[    0.680000] bootconsole [early0] disabled
[    0.700000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
[    0.720000] of_serial: probe of 10000e00.uart2 failed with error -28
[    0.730000] MT7628/7688 SPI Driver By WRTnode Team !
[    0.740000] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    0.760000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.770000] m25p80 spi0.0: using chunked io
[    0.780000] 4 ofpart partitions found on MTD device spi0.0
[    0.790000] Creating 4 MTD partitions on "spi0.0":
[    0.800000] 0x000000000000-0x000000030000 : "u-boot"
[    0.810000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.820000] 0x000000040000-0x000000050000 : "factory"
[    0.830000] 0x000000050000-0x000001000000 : "firmware"
[    0.900000] 2 uimage-fw partitions found on MTD device firmware
[    0.920000] 0x000000050000-0x00000016f797 : "kernel"
[    0.930000] 0x00000016f797-0x000001000000 : "rootfs"
[    0.940000] mtd: device 5 (rootfs) set to be root filesystem
[    0.950000] 1 squashfs-split partitions found on MTD device rootfs
[    0.960000] 0x000000760000-0x000001000000 : "rootfs_data"
[    0.980000] ralink_soc_eth 10100000.ethernet: generated random MAC address 3a:a8:ba:40:00:93
[    1.000000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    1.010000] mt7621_wdt 10000120.watchdog: Initialized
[    1.020000] TCP: cubic registered
[    1.030000] NET: Registered protocol family 17
[    1.040000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.060000] 8021q: 802.1Q VLAN Support v1.8
[    1.090000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.100000] Freeing unused kernel memory: 176K (80334000 - 80360000)
[    2.850000] init: Console is alive
[    2.850000] init: - watchdog -
[    6.010000] usbcore: registered new interface driver usbfs
[    6.020000] usbcore: registered new interface driver hub
[    6.030000] usbcore: registered new device driver usb
[    6.050000] gpio_rst_drv_init:Hello slic_gpio
[    6.050000] gpio_rst_drv_init:Hello gpio_rst
[    6.060000] spi_drv_init:Hello spi
[    6.070000] spi_drv_init:SIM_ENABLE
[    6.080000] gpio_rst_drv_init:Hello watchdog
[    6.100000] SCSI subsystem initialized
[    6.110000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.130000] ehci-platform: EHCI generic platform driver
[    6.310000] U2PHY P0 set SRCTRL calibration value: 7
[    6.310000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    6.330000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    6.340000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.370000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.380000] hub 1-0:1.0: USB hub found
[    6.390000] hub 1-0:1.0: 1 port detected
[    6.400000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.410000] ohci-platform: OHCI generic platform driver
[    6.420000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    6.430000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    6.450000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    6.520000] hub 2-0:1.0: USB hub found
[    6.530000] hub 2-0:1.0: 1 port detected
[    6.540000] usbcore: registered new interface driver usb-storage
[    6.710000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.890000] init: - preinit -
[    7.820000] rt305x-esw 10110000.esw: link changed 0x00
[    8.040000] random: mktemp urandom read with 13 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   10.780000] rt305x-esw 10110000.esw: link changed 0x04
[   11.290000] mount_root: loading kmods from internal overlay
[   12.060000] jffs2: notice: (373) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.090000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.150000] block: extroot: not configured
[   12.420000] jffs2: notice: (370) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.910000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.970000] block: extroot: not configured
[   12.980000] mount_root: switching to jffs2 overlay
[   13.020000] procd: - early -
[   13.020000] procd: - watchdog -
[   13.820000] procd: - ubus -
[   14.840000] procd: - init -
Please press Enter to activate this console.
[   16.360000] NET: Registered protocol family 10
[   16.390000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[   16.410000] Initializing XFRM netlink socket
[   16.430000] NET: Registered protocol family 15
[   16.480000] tun: Universal TUN/TAP device driver, 1.6
[   16.490000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   16.540000] l2tp_core: L2TP core driver, V2.0
[   16.550000] l2tp_netlink: L2TP netlink interface
[   16.570000] gre: GRE over IPv4 demultiplexor driver
[   16.580000] ip_gre: GRE over IPv4 tunneling driver
[   16.590000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.660000] Ralink/MTK WiFi EEPROM API Build for MT7620. 
[   16.670000] i2c /dev entries driver
[   16.720000] u32 classifier
[   16.730000]     input device check on
[   16.740000]     Actions configured
[   16.750000] Mirror/redirect action on
[   16.770000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
[   17.790000] 
[   17.790000] 
[   17.790000] === pAd = c066f000, size = 1475888 ===
[   17.790000] 
[   17.810000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[   17.820000] <-- RTMPAllocAdapterBlock, Status=0
[   17.830000] RtmpChipOpsHook(492): Not support for HIF_MT yet!
[   17.840000] mt7628_init()-->
[   17.850000] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
[   17.860000] e2.bin mt7628_init(1117)::(2), pChipCap->fw_len(63056)
[   17.870000] mt_bcn_buf_init(218): Not support for HIF_MT yet!
[   17.880000] <--mt7628_init()
[   17.930000] arp_tables: (C) 2002 David S. Miller
[   17.940000] usbcore: registered new interface driver cdc_wdm
[   17.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.050000] usbcore: registered new interface driver usbserial
[   18.060000] usbcore: registered new interface driver usbserial_generic
[   18.070000] usbserial: USB Serial support registered for generic
[   18.120000] xt_time: kernel timezone is -0000
[   18.150000] PPP generic driver version 2.4.2
[   18.160000] PPP MPPE Compression module registered
[   18.170000] NET: Registered protocol family 24
[   18.190000] PPTP driver version 0.8.5
[   18.200000] qmi_wwan: probe of 1-1:1.3 failed with error -1
[   18.210000] qmi_wwan: probe of 1-1:1.5 failed with error -1
[   18.220000] usbcore: registered new interface driver qmi_wwan
[   18.230000] SIM7600 device
[   18.240000] simcom usbnet bind here
[   18.250000] simcom_wwan 1-1:1.5 wwan0: register 'simcom_wwan' at usb-101c0000.ehci-1, SIMCOM wwan/QMI device, 9e:ed:c6:12:43:7c
[   18.270000] usbcore: registered new interface driver simcom_wwan
[   18.300000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   18.310000] usbcore: registered new interface driver option
[   18.320000] usbserial: USB Serial support registered for GSM modem (1-port)
[   18.330000] option 1-1:1.0: GSM modem (1-port) converter detected
[   18.350000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[   18.360000] option 1-1:1.1: GSM modem (1-port) converter detected
[   18.370000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[   18.380000] option 1-1:1.2: GSM modem (1-port) converter detected
[   18.400000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[   18.410000] option 1-1:1.3: GSM modem (1-port) converter detected
[   18.420000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[   18.440000] option 1-1:1.4: GSM modem (1-port) converter detected
[   18.450000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
[   18.480000] usbcore: registered new interface driver qcserial
[   18.490000] usbserial: USB Serial support registered for Qualcomm USB modem
[   22.500000] rt305x-esw 10110000.esw: link changed 0x00
[   25.250000] TX_BCN DESC a2437000 size = 320
[   25.260000] RX[0] DESC a2439000 size = 2048
[   25.270000] RX[1] DESC a243c000 size = 1024
[   25.420000] E2pAccessMode=2
[   25.430000] cfg_mode=9
[   25.430000] cfg_mode=9
[   25.440000] wmode_band_equal(): Band Equal!
[   25.450000] APSDCapable[0]=1
[   25.460000] APSDCapable[1]=1
[   25.460000] APSDCapable[2]=1
[   25.470000] APSDCapable[3]=1
[   25.470000] APSDCapable[4]=1
[   25.480000] APSDCapable[5]=1
[   25.480000] APSDCapable[6]=1
[   25.490000] APSDCapable[7]=1
[   25.500000] APSDCapable[8]=1
[   25.500000] APSDCapable[9]=1
[   25.510000] APSDCapable[10]=1
[   25.510000] APSDCapable[11]=1
[   25.520000] APSDCapable[12]=1
[   25.520000] APSDCapable[13]=1
[   25.530000] APSDCapable[14]=1
[   25.540000] rt305x-esw 10110000.esw: link changed 0x04
[   25.550000] APSDCapable[15]=1
[   25.550000] default ApCliAPSDCapable[0]=1
[   25.560000] default ApCliAPSDCapable[1]=1
[   25.760000] Key1Str is Invalid key length(0) or Type(0)
[   25.770000] Key1Str is Invalid key length(0) or Type(0)
[   25.780000] Key1Str is Invalid key length(0) or Type(0)
[   25.790000] Key1Str is Invalid key length(0) or Type(0)
[   25.810000] Key2Str is Invalid key length(0) or Type(0)
[   25.820000] Key2Str is Invalid key length(0) or Type(0)
[   25.830000] Key2Str is Invalid key length(0) or Type(0)
[   25.840000] Key2Str is Invalid key length(0) or Type(0)
[   25.850000] Key3Str is Invalid key length(0) or Type(0)
[   25.860000] Key3Str is Invalid key length(0) or Type(0)
[   25.870000] Key3Str is Invalid key length(0) or Type(0)
[   25.880000] Key3Str is Invalid key length(0) or Type(0)
[   25.890000] Key4Str is Invalid key length(0) or Type(0)
[   25.900000] Key4Str is Invalid key length(0) or Type(0)
[   25.910000] Key4Str is Invalid key length(0) or Type(0)
[   25.920000] Key4Str is Invalid key length(0) or Type(0)
[   25.990000] RTMPSetDefaultChannel() : default channel to 1 
[   26.000000] load fw image from fw_header_image
[   26.010000] AndesMTLoadFwMethod1(2174)::pChipCap->fw_len(63056)
[   26.020000] FW Version:_e2_mp
[   26.030000] FW Build Date:20150211175503
[   26.100000] CmdAddressLenReq:(ret = 0)
[   26.100000] CmdFwStartReq: override = 1, address = 1048576
[   26.110000] CmdStartDLRsp: WiFI FW Download Success
[   26.120000] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
[   26.140000] efuse_probe: efuse = 10000002
[   26.140000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
[   26.150000] RtmpEepromGetDefault::e2p_dafault=2
[   26.160000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
[   26.180000] NVM is FLASH mode
[   26.180000] 1. Phy Mode = 14
[   26.190000] EEPROM:Read from [factory] offset 0x0,length 0x200.
[   26.540000] Country Region from e2p = ffff
[   26.560000] tssi_1_target_pwr_g_band = 30
[   26.560000] 2. Phy Mode = 14
[   26.570000] 3. Phy Mode = 14
[   26.570000] NICInitPwrPinCfg(11): Not support for HIF_MT yet!
[   26.590000] NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
[   26.600000] mt_mac_init()-->
[   26.610000] MtAsicInitMac()-->
[   26.660000] mt7628_init_mac_cr()-->
[   26.660000] MtAsicSetMacMaxLen(1241): Set the Max RxPktLen=1024!
[   26.670000] <--mt_mac_init()
[   26.680000]  WTBL Segment 1 info:
[   26.690000]          MemBaseAddr/FID:0x28000/0
[   26.690000]          EntrySize/Cnt:32/128
[   26.700000]  WTBL Segment 2 info:
[   26.710000]          MemBaseAddr/FID:0x40000/0
[   26.710000]          EntrySize/Cnt:64/128
[   26.720000]  WTBL Segment 3 info:
[   26.730000]          MemBaseAddr/FID:0x42000/64
[   26.740000]          EntrySize/Cnt:64/128
[   26.740000]  WTBL Segment 4 info:
[   26.750000]          MemBaseAddr/FID:0x44000/128
[   26.760000]          EntrySize/Cnt:32/128
[   26.760000] AntCfgInit(2876): Not support for HIF_MT yet!
[   26.880000] MCS Set = ff ff 00 00 01
[   26.880000] MtAsicSetChBusyStat(826): Not support for HIF_MT yet!
[   26.940000] CmdSlotTimeSet:(ret = 0)
[   29.650000] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   29.660000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.670000] [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0
[   29.680000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.690000] [PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0
[   29.710000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.720000] [PMF]ap_pmf_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0
[   29.730000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   29.740000] MtAsicSetRalinkBurstMode(2919): Not support for HIF_MT yet!
[   29.760000] MtAsicSetPiggyBack(763): Not support for HIF_MT yet!
[   29.790000] MtAsicSetTxPreamble(2898): Not support for HIF_MT yet!
[   29.810000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.820000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.840000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.860000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   29.870000] The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8
[   29.880000] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
[   29.900000] Main bssid = d1:3c:30:6e:31:12
[   29.900000] <==== rt28xx_init, Status=0
[   29.940000] mt7628_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0xd7083f0f
[   29.950000] WiFi Startup Cost (ra0): 4.700s
[   30.130000] device eth0.1 entered promiscuous mode
[   30.140000] device eth0 entered promiscuous mode
[   30.240000] br-lan: port 1(eth0.1) entered forwarding state
[   30.260000] br-lan: port 1(eth0.1) entered forwarding state
[   30.320000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   30.510000] AddTxSType: already registered TxSType (PID = 32, Format = 0
[   30.520000] The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8
[   32.260000] br-lan: port 1(eth0.1) entered forwarding state
[   32.870000] AddTxSType: already registered TxSType (PID = 32, Format = 0
[   32.890000] The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8
[   32.900000] ##### mbss_cr_enable, BssId = 1
[   34.860000] AddTxSType: already registered TxSType (PID = 32, Format = 0
[   34.880000] AddTxSType: already registered TxSType (PID = 33, Format = 0
[   34.890000] The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8
[   34.900000] ##### mbss_cr_enable, BssId = 2
[   36.550000] AddTxSType: already registered TxSType (PID = 32, Format = 0
[   36.560000] AddTxSType: already registered TxSType (PID = 33, Format = 0
[   36.580000] AddTxSType: already registered TxSType (PID = 34, Format = 0
[   36.590000] The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8
[   36.600000] ##### mbss_cr_enable, BssId = 3
[   40.760000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   40.770000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   40.780000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   40.800000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   40.810000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   43.140000] gpio_rst_drv_open:Hello gpio_rst
[   44.890000] gpio_rst_drv_open:Hello watchdog
[   44.910000] gpio_rst_drv_ioctl:Hello WATCHDOG_ENABLE
[   45.830000] spi_drv_open:Hello spi
[   45.840000] gpio_rst__drv_ioctl:LA DI
[   45.840000] gpio_rst__drv_ioctl: LA GAO
[   45.870000] gpio_rst__drv_ioctl:SIM_ENABLE
[   46.960000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   46.970000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   46.980000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   47.000000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped



BusyBox v1.23.2 (2017-04-05 21:28:52 CST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Chaos Calmer, r49363)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
admin@TELPO:/# [   52.810000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   52.820000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   52.840000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   52.850000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   52.860000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   56.300000] random: nonblocking pool is initialized
[   58.680000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   58.690000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   58.700000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped
[   58.720000] simcom_wwan 1-1:1.5 wwan0: kevent 12 may have been dropped

要回复问题请先登录注册