使用github上的代码编译后,烧录uImage不能正常启动;ubuntu不能连接路由

1、从https://github.com/WRTnode/openwrt这里下载代码,按照wiki(http://wiki.wrtnode.cc/index.p ... t_SDK)上说的,在make menuconfig的时候 [ Subtarget ] 选择 [ WRTnode 2 series ](我购买的板子是WRTnode2P_DB_V1.2),编译好了的uImage下载到开发板上不能正确跑起来。master和wrtnode两个分支的代码都编译过,下载运行一直打印重复的信息:
Bytes transferred = 1137406 (115afe hex)
NetBootFileXferSize= 00115afe
Automatic boot of image at addr 0x80A00000 ...
## Booting image at 80a00000 ...
Image Name: MIPS OpenWrt Linux-3.18.29
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1137342 Bytes = 1.1 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 128

Starting kernel ...

[ 0.000000] Linux version 3.18.29 (txgcwm@E470) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #2 Sun Oct 29 16:09:03 CST 2017
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[ 0.000000] Linux version 3.18.29 (txgcwm@E470) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #2 Sun Oct 29 16:09:03 CST 2017
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[ 0.000000] Linux version 3.18.29 (txgcwm@E470) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #2 Sun Oct 29 16:09:03 CST 2017
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[ 0.000000] Linux version 3.18.29 (txgcwm@E470) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #2 Sun Oct 29 16:09:03 CST 2017
[ 0.000000] Board has DDR2


2、手机可以连接路由器的wifi,但是使用装载ubuntu的机子却不能连接。
 
已邀请:

xzmu - 10w

赞同来自:

你烧错固件了。
 
固件应该是sysupgrade.bin才是完整固件。uimage是没有经过dts patch的单纯内核。无论如何都跑步起来的。

要回复问题请先登录注册