usbnet驱动报错

usb转网口的驱动报
[ 102.490000] WiFi Startup Cost (ra0): 5.370s
[ 120.430000] usb 1-1: USB disconnect, device number 2
[ 120.440000] cdc_ether 1-1:1.0 eth1: unregister 'cdc_ether' usb-101c0000.ehci-1, CDC Ethernet Device
[ 120.460000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 120.480000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 120.500000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 120.520000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 120.550000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 120.560000] option 1-1:1.2: device disconnected
[ 120.570000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 120.590000] option 1-1:1.3: device disconnected
[ 120.600000] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 120.610000] option 1-1:1.4: device disconnected
[ 120.620000] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 120.640000] option 1-1:1.7: device disconnected
[ 120.650000] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
[ 120.660000] option 1-1:1.8: device disconnected
已邀请:

xzmu - 10w

赞同来自:

日志不足以诊断问题。需要提供使用的硬件、供电方式,完整的日志

bear_218 - 学习中,努力学习中

赞同来自:

大神:
硬件是采用pcie底座, 3.3v供电。
内核日志如下
3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   MIPS OpenWrt Linux-3.18.29
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1311483 Bytes =  1.3 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...

[    0.000000] Linux version 3.18.29 (root@ubuntu-telpo) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #1 Sun Jan 28 16:19:53 CST 2018
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is WRTnode2R
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0001e000
[    0.000000] Readback ErrCtl register=0001e000
[    0.000000] Memory: 60844K/65536K available (2913K kernel code, 141K rwdata, 632K rodata, 144K init, 190K bss, 4692K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_of_init: no matching clocksources found
[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] pinctrl core: initialized pinctrl subsystem
[    0.090000] NET: Registered protocol family 16
[    0.200000] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
[    0.350000] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK)
[    0.360000] mt7620-pci: probe of 10140000.pcie failed with error -1
[    0.380000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.390000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.400000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.410000] usbcore: registered new interface driver usbfs
[    0.420000] usbcore: registered new interface driver hub
[    0.430000] usbcore: registered new device driver usb
[    0.440000] Switched to clocksource MIPS
[    0.450000] NET: Registered protocol family 2
[    0.450000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.470000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.490000] TCP: reno registered
[    0.500000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.510000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.520000] NET: Registered protocol family 1
[    0.530000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.560000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.580000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.600000] msgmni has been set to 118
[    0.600000] io scheduler noop registered
[    0.610000] io scheduler deadline registered (default)
[    0.620000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[336]
[    0.640000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[350]
[    0.650000] gdma-rt2880 10002800.gdma: revision: 3, channels: 16
[    0.660000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.680000] console [ttyS0] disabled
[    0.680000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.700000] console [ttyS0] enabled
[    0.700000] console [ttyS0] enabled
[    0.710000] bootconsole [early0] disabled
[    0.710000] bootconsole [early0] disabled
[    0.730000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
[    0.750000] of_serial: probe of 10000e00.uart2 failed with error -28
[    0.760000] MT7628/7688 SPI Driver By WRTnode Team !
[    0.770000] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    0.790000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.800000] m25p80 spi0.0: using chunked io
[    0.810000] 4 ofpart partitions found on MTD device spi0.0
[    0.820000] Creating 4 MTD partitions on "spi0.0":
[    0.830000] 0x000000000000-0x000000030000 : "u-boot"
[    0.840000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.850000] 0x000000040000-0x000000050000 : "factory"
[    0.860000] 0x000000050000-0x000001000000 : "firmware"
[    0.930000] 2 uimage-fw partitions found on MTD device firmware
[    0.950000] 0x000000050000-0x00000019033b : "kernel"
[    0.960000] 0x00000019033b-0x000001000000 : "rootfs"
[    0.970000] mtd: device 5 (rootfs) set to be root filesystem
[    0.980000] 1 squashfs-split partitions found on MTD device rootfs
[    0.990000] 0x000000770000-0x000001000000 : "rootfs_data"
[    1.010000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    1.030000] PPP generic driver version 2.4.2
[    1.040000] PPP BSD Compression module registered
[    1.050000] PPP Deflate Compression module registered
[    1.060000] PPP MPPE Compression module registered
[    1.070000] NET: Registered protocol family 24
[    1.080000] usbcore: registered new interface driver cdc_ether
[    1.090000] usbcore: registered new interface driver simcom_wwan
[    1.100000] usbcore: registered new interface driver qmi_wwan
[    1.110000] usbcore: registered new interface driver cdc_wdm
[    1.120000] usbcore: registered new interface driver usbserial
[    1.130000] usbcore: registered new interface driver usbserial_generic
[    1.150000] usbserial: USB Serial support registered for generic
[    1.160000] usbcore: registered new interface driver option
[    1.170000] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.180000] mt7621_wdt 10000120.watchdog: Initialized
[    1.200000] xt_time: kernel timezone is -0000
[    1.200000] TCP: cubic registered
[    1.210000] NET: Registered protocol family 17
[    1.220000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.240000] 8021q: 802.1Q VLAN Support v1.8
[    1.250000] NET: Registered protocol family 36
[    1.280000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.290000] Freeing unused kernel memory: 144K (8039c000 - 803c0000)
[    3.030000] init: Console is alive
[    3.040000] init: - watchdog -
[    5.830000] gpio_rst_drv_init:Hello slic_gpio
[    5.840000] gpio_rst_drv_init:Hello gpio_rst
[    5.850000] spi_drv_init:Hello spi
[    5.850000] spi_drv_init:SIM_ENABLE
[    5.860000] gpio_rst_drv_init:Hello watchdog
[    5.880000] SCSI subsystem initialized
[    5.890000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.910000] ehci-platform: EHCI generic platform driver
[    6.090000] U2PHY P0 set SRCTRL calibration value: 6
[    6.090000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    6.110000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    6.120000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.150000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.160000] hub 1-0:1.0: USB hub found
[    6.170000] hub 1-0:1.0: 1 port detected
[    6.180000] ehci-pci: EHCI PCI platform driver
[    6.190000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.200000] ohci-platform: OHCI generic platform driver
[    6.210000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    6.220000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    6.240000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    6.310000] hub 2-0:1.0: USB hub found
[    6.320000] hub 2-0:1.0: 1 port detected
[    6.330000] usbcore: registered new interface driver usb-storage
[    6.490000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.650000] usb 1-1: config 1 has an invalid interface number: 7 but max is 6
[    6.660000] usb 1-1: config 1 has an invalid interface number: 8 but max is 6
[    6.670000] usb 1-1: config 1 has no interface number 5
[    6.680000] usb 1-1: config 1 has no interface number 6
[    6.700000] cdc_ether 1-1:1.0 eth1: register 'cdc_ether' at usb-101c0000.ehci-1, CDC Ethernet Device, 00:a0:c6:00:00:00
[    6.720000] option 1-1:1.2: GSM modem (1-port) converter detected
[    6.740000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[    6.750000] option 1-1:1.3: GSM modem (1-port) converter detected
[    6.760000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[    6.780000] option 1-1:1.4: GSM modem (1-port) converter detected
[    6.790000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[    6.800000] option 1-1:1.7: GSM modem (1-port) converter detected
[    6.820000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[    6.830000] option 1-1:1.8: GSM modem (1-port) converter detected
[    6.840000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
[    7.050000] init: - preinit -
[    7.890000] rt305x-esw 10110000.esw: link changed 0x00
[    8.110000] random: mktemp urandom read with 13 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   10.890000] rt305x-esw 10110000.esw: link changed 0x04
[   11.360000] mount_root: loading kmods from internal overlay
[   12.090000] jffs2: notice: (419) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.120000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.150000] block: extroot: not configured
[   12.320000] jffs2: notice: (416) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.810000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.840000] block: extroot: not configured
[   12.850000] mount_root: switching to jffs2 overlay
[   12.880000] procd: - early -
[   12.890000] procd: - watchdog -
[   13.680000] procd: - ubus -
[   14.700000] procd: - init -
Please press Enter to activate this console.
[   16.230000] NET: Registered protocol family 10
[   16.270000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[   16.290000] Initializing XFRM netlink socket
[   16.300000] NET: Registered protocol family 15
[   16.350000] tun: Universal TUN/TAP device driver, 1.6
[   16.360000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   16.400000] l2tp_core: L2TP core driver, V2.0
[   16.410000] l2tp_netlink: L2TP netlink interface
[   16.440000] gre: GRE over IPv4 demultiplexor driver
[   16.450000] ip_gre: GRE over IPv4 tunneling driver
[   16.470000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.500000] Ralink/MTK WiFi EEPROM API Build for MT7620. 
[   16.540000] i2c /dev entries driver
[   16.610000] u32 classifier
[   16.620000]     input device check on
[   16.630000]     Actions configured
[   16.640000] Mirror/redirect action on
[   16.660000] nf_conntrack version 0.5.0 (952 buckets, 3808 max)
[   17.660000] 
[   17.660000] 
[   17.660000] === pAd = c05e8000, size = 1477856 ===
[   17.660000] 
[   17.670000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[   17.690000] <-- RTMPAllocAdapterBlock, Status=0
[   17.700000] RtmpChipOpsHook(492): Not support for HIF_MT yet!
[   17.710000] mt7628_init()-->
[   17.710000] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
[   17.720000] e2.bin mt7628_init(1117)::(2), pChipCap->fw_len(63056)
[   17.740000] mt_bcn_buf_init(218): Not support for HIF_MT yet!
[   17.750000] <--mt7628_init()
[   17.800000] arp_tables: (C) 2002 David S. Miller
[   17.810000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.830000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   17.880000] PPTP driver version 0.8.5
[   17.890000] RTC HT1831 probe
[   17.930000] rtc-ht1381 600.rtc: rtc core: registered rtc-ht1381 as rtc0
[   17.940000] RTC HT1831 probe success!
[   22.280000] rt305x-esw 10110000.esw: link changed 0x00
[   25.260000] rt305x-esw 10110000.esw: link changed 0x04
[   26.550000] device eth0.1 entered promiscuous mode
[   26.560000] device eth0 entered promiscuous mode
[   26.610000] br-lan: port 1(eth0.1) entered forwarding state
[   26.620000] br-lan: port 1(eth0.1) entered forwarding state
[   26.670000] cdc_ether 1-1:1.0 eth1: kevent 12 may have been dropped
[   26.720000] TX_BCN DESC a2825000 size = 320
[   26.730000] RX[0] DESC a2827000 size = 2048
[   26.740000] RX[1] DESC a2828000 size = 1024
[   26.920000] E2pAccessMode=2
[   26.920000] cfg_mode=9
[   26.930000] cfg_mode=9
[   26.930000] wmode_band_equal(): Band Equal!
[   26.950000] APSDCapable[0]=1
[   26.950000] APSDCapable[1]=1
[   26.960000] APSDCapable[2]=1
[   26.960000] APSDCapable[3]=1
[   26.970000] APSDCapable[4]=1
[   26.970000] APSDCapable[5]=1
[   26.980000] APSDCapable[6]=1
[   26.990000] APSDCapable[7]=1
[   26.990000] APSDCapable[8]=1
[   27.000000] APSDCapable[9]=1
[   27.000000] APSDCapable[10]=1
[   27.010000] APSDCapable[11]=1
[   27.010000] APSDCapable[12]=1
[   27.020000] APSDCapable[13]=1
[   27.030000] APSDCapable[14]=1
[   27.030000] APSDCapable[15]=1
[   27.040000] default ApCliAPSDCapable[0]=1
[   27.050000] default ApCliAPSDCapable[1]=1
[   27.810000] Key1Str is Invalid key length(0) or Type(0)
[   27.830000] Key1Str is Invalid key length(0) or Type(0)
[   27.840000] Key1Str is Invalid key length(0) or Type(0)
[   27.850000] Key1Str is Invalid key length(0) or Type(0)
[   27.860000] Key2Str is Invalid key length(0) or Type(0)
[   27.870000] Key2Str is Invalid key length(0) or Type(0)
[   27.880000] Key2Str is Invalid key length(0) or Type(0)
[   27.890000] Key2Str is Invalid key length(0) or Type(0)
[   27.900000] Key3Str is Invalid key length(0) or Type(0)
[   27.910000] Key3Str is Invalid key length(0) or Type(0)
[   27.920000] Key3Str is Invalid key length(0) or Type(0)
[   27.930000] Key3Str is Invalid key length(0) or Type(0)
[   27.940000] Key4Str is Invalid key length(0) or Type(0)
[   27.950000] Key4Str is Invalid key length(0) or Type(0)
[   27.960000] Key4Str is Invalid key length(0) or Type(0)
[   27.970000] Key4Str is Invalid key length(0) or Type(0)
[   28.180000] c5:4d:97:66:e0:22:42:c9:a2:57:c8:17:da:e1:4d:46:
[   28.190000] 6e:9f:61:4c:b0:df:1c:28:fe:08:3d:a3:10:84:27:e8:
[   28.210000] 
[   28.260000] RTMPSetDefaultChannel() : default channel to 1 
[   28.270000] load fw image from fw_header_image
[   28.280000] AndesMTLoadFwMethod1(2174)::pChipCap->fw_len(63056)
[   28.290000] FW Version:_e2_mp
[   28.300000] FW Build Date:20150211175503
[   28.330000] CmdAddressLenReq:(ret = 0)
[   28.330000] CmdFwStartReq: override = 1, address = 1048576
[   28.340000] CmdStartDLRsp: WiFI FW Download Success
[   28.350000] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
[   28.370000] efuse_probe: efuse = 10000002
[   28.370000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
[   28.380000] RtmpEepromGetDefault::e2p_dafault=2
[   28.390000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
[   28.410000] NVM is FLASH mode
[   28.410000] 1. Phy Mode = 14
[   28.420000] EEPROM:Read from [factory] offset 0x0,length 0x200.
[   28.620000] br-lan: port 1(eth0.1) entered forwarding state
[   28.720000] Country Region from e2p = ffff
[   28.740000] tssi_1_target_pwr_g_band = 30
[   28.750000] 2. Phy Mode = 14
[   28.750000] 3. Phy Mode = 14
[   28.760000] NICInitPwrPinCfg(11): Not support for HIF_MT yet!
[   28.770000] NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
[   28.790000] mt_mac_init()-->
[   28.790000] MtAsicInitMac()-->
[   28.920000] mt7628_init_mac_cr()-->
[   28.920000] MtAsicSetMacMaxLen(1241): Set the Max RxPktLen=1024!
[   28.930000] <--mt_mac_init()
[   28.940000]  WTBL Segment 1 info:
[   28.950000]          MemBaseAddr/FID:0x28000/0
[   28.950000]          EntrySize/Cnt:32/128
[   28.960000]  WTBL Segment 2 info:
[   28.970000]          MemBaseAddr/FID:0x40000/0
[   28.970000]          EntrySize/Cnt:64/128
[   28.980000]  WTBL Segment 3 info:
[   28.990000]          MemBaseAddr/FID:0x42000/64
[   29.000000]          EntrySize/Cnt:64/128
[   29.000000]  WTBL Segment 4 info:
[   29.010000]          MemBaseAddr/FID:0x44000/128
[   29.020000]          EntrySize/Cnt:32/128
[   29.020000] AntCfgInit(2876): Not support for HIF_MT yet!
[   29.190000] CmdSlotTimeSet:(ret = 0)
[   29.220000] MCS Set = ff ff 00 00 01
[   29.220000] MtAsicSetChBusyStat(826): Not support for HIF_MT yet!
[   29.560000] br-lan: received packet on eth0.1 with own address as source address
[   32.300000] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   32.310000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   32.320000] [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0
[   32.330000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   32.340000] [PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0
[   32.360000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   32.370000] [PMF]ap_pmf_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0
[   32.380000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   32.390000] MtAsicSetRalinkBurstMode(2919): Not support for HIF_MT yet!
[   32.410000] MtAsicSetPiggyBack(763): Not support for HIF_MT yet!
[   32.440000] MtAsicSetTxPreamble(2898): Not support for HIF_MT yet!
[   32.460000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   32.470000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   32.490000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   32.510000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
[   32.520000] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
[   32.530000] Main bssid = 00:0c:43:e1:76:28
[   32.540000] <==== rt28xx_init, Status=0
[   32.560000] mt7628_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0xd7083f0f
[   32.570000] WiFi Startup Cost (ra0): 5.850s
[   33.440000] br-lan: received packet on eth0.1 with own address as source address
[   34.430000] br-lan: received packet on eth0.1 with own address as source address
[   35.430000] br-lan: received packet on eth0.1 with own address as source address
[   40.340000] gpio_rst_drv_open:Hello gpio_rst
[   44.780000] br-lan: received packet on eth0.1 with own address as source address
[   44.800000] br-lan: received packet on eth0.1 with own address as source address
[   44.810000] br-lan: received packet on eth0.1 with own address as source address
[   44.830000] br-lan: received packet on eth0.1 with own address as source address
[   44.840000] br-lan: received packet on eth0.1 with own address as source address
[   44.860000] br-lan: received packet on eth0.1 with own address as source address
[   44.870000] br-lan: received packet on eth0.1 with own address as source address
[   44.880000] br-lan: received packet on eth0.1 with own address as source address
[   44.900000] br-lan: received packet on eth0.1 with own address as source address
[   44.910000] br-lan: received packet on eth0.1 with own address as source address



BusyBox v1.23.2 (2018-01-28 16:14:50 CST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Chaos Calmer, r49363)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
admin@TELPO:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          inet addr:192.168.10.1  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:43ff:fee1:7628/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:50 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3248 (3.1 KiB)  TX bytes:1410 (1.3 KiB)

eth0      Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          inet6 addr: fe80::20c:43ff:fee1:7628/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:73 errors:0 dropped:0 overruns:0 frame:0
          TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:14972 (14.6 KiB)  TX bytes:7679 (7.4 KiB)
          Interrupt:5 

eth0.1    Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:73 errors:0 dropped:0 overruns:0 frame:0
          TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:13658 (13.3 KiB)  TX bytes:2499 (2.4 KiB)

eth0.2    Link encap:Ethernet  HWaddr 00:0C:43:E1:76:29  
          inet6 addr: fe80::20c:43ff:fee1:7629/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:3474 (3.3 KiB)

eth1      Link encap:Ethernet  HWaddr 00:A0:C6:00:00:00  
          inet6 addr: fe80::2a0:c6ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:3334 (3.2 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:96 errors:0 dropped:0 overruns:0 frame:0
          TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:6696 (6.5 KiB)  TX bytes:6696 (6.5 KiB)

ra0       Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          inet6 addr: fe80::20c:43ff:fee1:7628/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:6 

admin@TELPO:/# [   58.340000] random: nonblocking pool is initialized
[   62.620000] net_ratelimit: 12 callbacks suppressed
[   62.630000] br-lan: received packet on eth0.1 with own address as source address
[   70.510000] usb 1-1: USB disconnect, device number 2
[   70.520000] cdc_ether 1-1:1.0 eth1: unregister 'cdc_ether' usb-101c0000.ehci-1, CDC Ethernet Device
[   70.540000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[   70.560000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[   70.580000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[   70.600000] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[   70.620000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[   70.630000] option 1-1:1.2: device disconnected
[   70.640000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[   70.660000] option 1-1:1.3: device disconnected
[   70.670000] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[   70.680000] option 1-1:1.4: device disconnected
[   70.690000] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[   70.710000] option 1-1:1.7: device disconnected
[   70.720000] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
[   70.740000] option 1-1:1.8: device disconnected
[   74.800000] br-lan: received packet on eth0.1 with own address as source address
[   74.820000] br-lan: received packet on eth0.1 with own address as source address
[   74.830000] br-lan: received packet on eth0.1 with own address as source address
[   74.850000] br-lan: received packet on eth0.1 with own address as source address
[   74.860000] br-lan: received packet on eth0.1 with own address as source address
[   74.880000] br-lan: received packet on eth0.1 with own address as source address
[   74.890000] br-lan: received packet on eth0.1 with own address as source address
[   74.900000] br-lan: received packet on eth0.1 with own address as source address
[   74.920000] br-lan: received packet on eth0.1 with own address as source address

admin@TELPO:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          inet addr:192.168.10.1  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:43ff:fee1:7628/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:81 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:4962 (4.8 KiB)  TX bytes:1668 (1.6 KiB)

eth0      Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          inet6 addr: fe80::20c:43ff:fee1:7628/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:130 errors:0 dropped:0 overruns:0 frame:0
          TX packets:57 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:28260 (27.5 KiB)  TX bytes:11279 (11.0 KiB)
          Interrupt:5 

eth0.1    Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:130 errors:0 dropped:0 overruns:0 frame:0
          TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:25920 (25.3 KiB)  TX bytes:2631 (2.5 KiB)

eth0.2    Link encap:Ethernet  HWaddr 00:0C:43:E1:76:29  
          inet6 addr: fe80::20c:43ff:fee1:7629/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:6894 (6.7 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:96 errors:0 dropped:0 overruns:0 frame:0
          TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:6696 (6.5 KiB)  TX bytes:6696 (6.5 KiB)

ra0       Link encap:Ethernet  HWaddr 00:0C:43:E1:76:28  
          inet6 addr: fe80::20c:43ff:fee1:7628/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:6 
eth1网口是在读取ttyUSB0后没有的,而且读取的时候报错usb_wwan_indat_callback: resubmit read urb failed.

xzmu - 10w

赞同来自:

硬件电路请严格参考网卡的设计。

要回复问题请先登录注册