WrtNode1 basic question

I got my board +standard shield but I do not 100% sure how I should use it. ;)

1. when I take it out of the box put on the shield, put RJ45 cable and other end to the router login ssh/telnet should it has internet access or not?
2. same question regarding 1 difference, connect with the prepared blue cable 4 wire RJ45 cable directly to the router
3. could I connect it via WIFI to my router and have internet access without any RJ45 cable (login ssh/telnet)?
I have do everything like http://wiki.wrtnode.com/index.php?title=Starting ->No internet no happiness , I got ip address but still not have internet
What should I do more?

I can post my /etc/config setting if helps

thx
已邀请:

xzmu - 10w

赞同来自:

1.by default, the shield RJ45(port 3) is LAN port. You can't access the internet by this port unless you change the vlan setting
2.the default wan port is port 4
3.yes
 
btw, you can upgrade the firmware on d.wrtnode.com or this firmware in attachment, i prefer attachment's firmware

Zsolo

赞同来自:

regarding "2.the default wan port is port 4"
 
are you sure that WAN port is port 4 and not port 0?
http://wiki.wrtnode.com/index.php?title=Pin_map
If I am right Port4 should be PIN 14,15,1,2 ?
 
 

xzmu - 10w

赞同来自:

some firmware is port0, it's depending your vlan config

要回复问题请先登录注册